Big steve

I have the same problem with my CZ style too I have changed the scope and mounts it didn't make any difference My next step is to zero the rifle and mark the SAK moderator then take it off and put it back on to see if the mark ends up in a different place and see what it shoots like I have noticed that the nickel barrel gets warm well before my other normal CZ blued barrel ? If that don't work its going back to Edgar brothers for them to sort ... ATB Steve

I had 223 and 308 on my first FAC ticket but I could only use them in my local shooting club were I am a member The land I shoot over is approved to 243... My FAO told me to give it a year and then apply for a variation for the 223 for fox control Hope this helps Steve

Anybody out there who can confirm the same, that there barrel thread grub screw is infact fitted The threaded hole you have shown is where your stock bolt screws into on the .17HMR ....my two CZ's are the same just remember when you screw the stock back on the the front bolt is slighty longer by 3 threads .....i always make sure that both stock bolts are the same tightness too ......my 22" barrel silhouette can do 15mm group at 100 yrds no problem ....my 22" barrel style struggles to do a 25mm group at 100 yrds.....and both are cleaned every 300 rounds ......hope this helps mate ......AT