Jump to content

slave

Members
 View Profile  See their activity

  • Content Count

    135

  • Joined

  • Last visited

 Content Type 

Everything posted by slave

  1. slave
    The Titan no 9 is for the mk1/2 tx200 the Titan no 10 is the correct spring for the mk3 tx the gun will be way over powered with no 9 titan no 9 part no TS009 outside diameter 21mm inner diameter 14.75mm wire thickness 3.3mm number of coils 27 spring length 280mm titan n0 10 part no TS010 outside diameter 21mm inner diameter 14.8mm wire thickness 3.1mm number of coils 27 spring length 230mm
  2. slave
    These might help the first page won't upload as the file is over 500kb x1AASidelever SE 90 Page 2.pdfOLD.SPRING.SIDELEVER.pdf All the Aa side levers use the same action.
  3. slave
    Dave Hall is in the Sheffield area he will tune the gun for not much more than 60. contact him directly on: 07411429307 or visit his forum: www.airgunshootersuk.com
  4. slave
    The spring has been replaced with a sqare section spring these are not ideal how much preload did the spring have? as it may be to short best to get a replacment. The metal filings could be from the washers the preload washers air arms use are hardened steel lesser quality washers can be chewed up leaving metal filings. Check the condition of the piston seal put the piston in the comp tube put your finger over the transfer port push down on the piston. Check the condition of the breech seals in the comp tube. Also check the lockup of the comp tube make sure there is no play when the gun i
  5. slave
    Has the gun got a shroud or silencer? Combros don't like muzzle blast i tried one on a Hw98 and it would only read 1 out 5 shots.
  6. slave
    Hi Daz how many lumens was the model you brought?
  7. slave
    Parcelforce will only cover you for £100 compensation if your gun goes missing or has "an accident" so posting is a risk.
  8. slave
    This might be the case but the anger should be steered towards the mangement not the consumer.
  9. slave
    It was probably this tw@t who delivered it.
  10. slave
    These might have one http://www.predatorairgunspares.com/career-707sumatra.html
  11. slave
  12. slave
    I also have a WTC with broken crosshairs it was second hand so i have no receipt
  13. slave
    Try Falcon Accuracy plus .22 5.52 13.43 grains these are made by JSB. http://www.airgunbuyer.com/details.asp?cat=Pellets&SubCat=Pellets&Product=2848
  14. slave
    have at look at this http://www.thehuntinglife.com/forums/topic/282731-birmingham-made-22-bsa-supersport-tuned-and-reblued-mint/
  15. slave
    Collin Malloy is very good not sure how much but he is very reasonable a couple of members on here have had guns reblued by Collin. You will need to strip out the internals and just send the parts that need rebluing also avoid royal mail this courier has been recomended for gun parts. https://www.myhermes.co.uk/ Collin Malloy contact details 07565582549
  16. slave
    The CS700 is more of a sporter stock the CS800 is more for target the grip is straighter and the cheekpeice is higher.
  17. slave
    If it shoots nice then just send the action for rebluing.
  18. slave
    From what the bloke says in the video blue streaks may be painted brass they have an alloy coloured bolt. The golden streak has a black bolt with a polished brass action also a 50th aniversary medalion inlayed in the stock.
  19. slave
    Sheridan 50th anniversary Golden streak http://www.gunauction.com/buy/7820860/air-gun/air-gun-rifles/collectors-50th-ann-sheridan-gold-streak-air-rifle
  20. slave
    Try Dave at Scr his prices are good http://www.scr-airguns.co.uk/
  21. slave
    Take the trigger guard off and turn the allen screw (number 4 in the diagram) clockwise a quarter of a turn until it feels right. http://www.airguns.net/general_tx200_trigger.php
  22. slave
    Try Jsb or AA feild pellets in it Cz barrels normaly shoot very well with these
  23. slave
    I would stick with the Slavia a lot of people like these in .22 it should run at 11.5ftlbs the piston has delrin bearings and a barrel latch they are built bt Czech giant Cz strip and relube as they can be over lubed when assembled http://www.vzduchovka.cz/dokumentace/Slavia634_rozkres.gif
  24. slave
    He's off again post 8 http://www.airgunbbs.com/showthread.php?679962-Spring-Tests-HW-Factory-Titan-V-Mach
  25. slave
    post 21 http://www.airgunbbs.com/showthread.php?676036-HW99-Sandwell-field-sports-imp./page2 Have a look at his sig the guy is a troll slags everything off bar what he owns.
×
×
  • Create New...