zuko

Hi guys, Unfortunately my HW100 is leaking from the small hole at the left in the picture, is this serious or an easy fix? Leaked 100 bar in about 20 mins? any ideas guys? Cheers ppl ?

What setting do you use on your camera to get these sort of shots? I'm well impressed

I'm happy to be in the 100 elite club

That explains it cheers Dave, as I also don't want to upset anyone As for Daystates AKA Villaman, AKA the guy who wouldny know a good rifle if it hit him in the face , I'm sorry for the ribbing your getting because of my honest mistake mistake OOPS!! All the best guys,

Your correct I have no idea

What a f%%&ing insult ,tried to help you out and you called me that forbidden word ,how dare you Eh!!

Cheers for the link Daystates and thanks to all you other guys for your help. Got it sorted now

Sorry to bother you guys again but I noticed I was loosing pressure somewhere on my rifle, about 10lb every day so I took the cylinder off and The gauge stayed the same so its not a cylinder problem. I have replaced the breech block seal the filling probe seal and the white PTFE valve stem seal but its still loosing pressure is there any other seals that are prone to releasing pressure. Cheers in advance guys,

Cheers for your help guys, that's put my mind at ease I think

Is 10.8 ft lb your average or maximum from all your pellets fired?

Hello there I was told that the Police use RWS Hobby to try to push the guns over in our area and the use a combro so I have used the same combination to make sure. I think from what I have heard that upper 10's with superdome and that seems to pan out at 11.5 with hobbys. My hw 95 seems to work very well like that. Hope that helps you. I wish there was a british standard pellet weight say 14.5 in .22 that could be up to 12ftlbs with a bit of lee way. Or just up the limit to 15 ftlbs . Cheers for your help

If it was too low / high I was going to send it to Hull cartridge but if the readings are ok I am super happy as I will have saved a lot of hassle and money.

Hi Rez, Is 11.1 the average or maximum, what pellet do you use? Cheers for your reply.

Cheers for your reply Born Hunter, I am just a bit unsure as to what a good reading via accupells in .22 would be I don't want it to be overpowered if it were to be tested but on the same hand I don't want my rifle to be under powered as it is used for pigeons and rabbits and I like to know it will be killed outright and not injured. I realize if it's a head shot then all should be well but as we all know sometimes we can miss out desired spot due to the quarry moving at the last second. Does anyone know what to set the foot lb at in .22 accupells 14.3 to guarantee that it will