Jump to content

andy draper

Members
 View Profile  See their activity

  • Content Count

    53

  • Joined

  • Last visited

 Content Type 

Everything posted by andy draper

  1. andy draper
    any pics mate.
  2. andy draper
    If you are at 11.5 now the top hat will more than likely put you over the limit.Extra weight and greater spring compression plus the liner,as it reduces friction could put a couple of f/p on it.If you have any preload washers fitted I would take them out.
  3. andy draper
    Do a google search mate,you will find out how the AT can "fall off".Depending on the age of the gun it may not even have it fitted.It is not illegal to remove it or own a gun without it fitted and as your gun is out of warranty it wont effect that either.
  4. andy draper
    They are fine for pcp use but no good for springers not 100% sure of the technical side of it,it's something to do with the "recoil" being faster than the pellet leaving the barrel so the bipod gets this force transferred to it therefore kicking the barrel and losing your accuracy.I have seen some guns with the plastic looking barrel fitted rest/bipod as opposed to the stock mounted one but have no idea if these are any good,I would guess not.
  5. andy draper
    It goes inside the piston mate,same length and diameter,make it a bit longer and cut triangle shapes out of one end,fold these inside it and put this end in the piston first then the spring.The folded under bit is trapped by the spring against the piston head thus holding it in place.You can make them out of a pop can,or get some PTFE sheet off ebay £6 for an A4 size sheet you can get a few from that.In my 97 I made one from 0.5 mm thickness PTFE nice fit but not too tight,any thicker would be too much.
  6. andy draper
    Got one in my 97,but it has a top hat and spring guide fitted as well as a ptfe piston sleeve.Did you get a kit or just the spring,as the spring alone will reverberate without the guide.
  7. andy draper
    Lad on the AGF does them with a top hat slip and washers for £18 posted.
  8. andy draper
    Airgunforum.co.uk He wants £18 posted for your own spes or £23 If you send him your spring return posted.Just look in the gunsales forum. andy.
  9. andy draper
    There is a bloke on AGF advertising custom made ones,either send him your measurements or your spring. andy.
  10. andy draper
    Cheers mate,keep me in mind if you get stuck with it i'm sure we can come to some sort of a deal. andy.
  11. andy draper
    PM sent.
  12. andy draper
    Arrived today,well packed,minter.Good bloke to deal with. andy.
  13. andy draper
    PM sent,I will take it please. andy.
  14. andy draper
    Hi mate,is that posted? cheers, andy.
  15. andy draper
    Where abouts are you mate. andy.
  16. andy draper
    Colin Malloy,is the blokes name.
  17. andy draper
    how much collected mate. andy.
  18. andy draper
    PM sent,for EB. andy.
  19. andy draper
    http://www.airgunspares.com/store/search.asp £45 at knibbs,think there is a tactical on ebay as well.If the pics don't come up,write "ultra stock" in the search box top right. andy.
  20. andy draper
    Thanks for that mate,out of stock at the moment,but put it on notification. cheers, andy.
  21. andy draper
    As above,cash waiting. andy.
  22. andy draper
    has he tried loading it without the mag in? this would eliminate the mag as the problem and take it from there. andy.
  23. andy draper
    any pics?
  24. andy draper
    Where are you mate.
  25. andy draper
    Hi mate,i wipe my gun off with an old cotton t towel,the ones that don't leave fluff everywhere.The oil i use to give it a wipe with is solv-it gun oil,aerosol,just spray a bit on a cloth.If iv'e got the gun wet i dry it and leave it in the boiler cupboard overnight as it's warm and dry and not hot so wont damage the wood.Mine is a walnut stock,i use a walnut oil applied by hand once a month to treat it.The scratch you have can be removed by putting a towel over it and gently ironing it,with the iron switched on,it only takes a minute.Make sure you store the gun somewhere dry,not where there i
×
×
  • Create New...