-->
QUOTE(john b @ May 29 2006, 04:14 PM) <{POST_SNAPBACK}>
OK, here we go then.
SeeSaw Box Trap
The box is basically a tunnel about 30" long, with an inside width of 4". The original design I saw a photo of in the book had a slopping lid, 3.5" high at the entrance up to 5 or 6 at the 'exit' and I built one like that as mk1.
One end is open, the other end is sealed but has to let light in, so it can be covered in mesh or perspex.
Inside there is a seesaw of thin plywood positioned so that when the trap is set, the end seesaw is touching the floor at the tunnel entra