Youngun

Yes thats right they are blanks and not blades and so just need an edge ground. many thanks Alex

Hi all I have a mix of 52100 steel knife blanks that have been professionaly laser cut and heat treated in sheffield. These are quality blanks however I do not have the time to finish them myself and so I thought I would put them up on here so that they can get finished and so I can get some of the money back that I have invested in these(which I will most likely spend on some more custom knives ). First up is my large hunter model: I have 3 of these that are 185mm long by 30mm wide by 5.8mm thick and one has been partially ground I would like £18 each for these posted next

Hi all I have a mix of 52100 steel knife blanks that have been professionaly laser cut and heat treated in sheffield. These are quality blanks however I do not have the time to finish them myself and so I thought I would put them up on here so that they can get finished and so I can get some of the money back that I hav invested in these(which I will most likely spend on some more custom knives ). First up is my large hunter model: I have 7 of these that are 185mm long by 30mm wide by 5.8mm thick I would like £18 each for these posted next up is a woodlore design with room to

Hi all after taking on a new job I have been left with very little time to make knives and so have come to a point where I have to sell off the last of my stock of materials and projects, they will be going cheap as I would like rid of them as they are taking up too much space. first up is a mixed lot of scales okay moving from top row left to right then onto the bottom row 1. chestnut scales 3/8" x 1 1/2" x 6" 2. rosewood scales 3/8" x 2 1/2" x5" 3. bocote 3/8" x 1 1/2" x 5" 4. zebrawood 3/8" x 1 3/4" x 5" 5.african olivewood 3/8" x 1 1/2" x 6" 6. walnut burl 3/8" x 2" x 5"

This is now sold. many thanks Alex

Hi all I have for sale a woolore blade with the materials to make the handle. The blade is 220mm long and is 4mm thick 52100 that has been fully heat treated. The blade comes with : 1 x pair of green canvas micarta scales 1 x set of stainless steel tube and pins 1 x pair of red fibre liners (not shown in photo) here it is : this kit is for sale for £35 including postage many thanks Alex

Hi all I have a few bits for sale which i have no time to use. first up are two blades both partially ground they both just need a secondary bevel adding to them. the top one is 4.5mm 01 fully heat treated with a full flat grind the second one down is made from heat treated 52100 and has a sabre grind I would like £40 posted for the pair next up is some antler I have spare : I would like £30 posted for all of the coronets shown above next up is a large selection of deer antler sections I reckon a few kilos worth I would like £45 posted for this lot Many th

Thanks mate and the first knife in the first photo has now sold

Bottom knife blank now sold many thanks Alex

hi all due to work commitments i now have very little shed time at the moment and so i am selling some of my knife making kit that im not going to be able to finish. first up is a mixed lot of knives and a blade all made by me from 4mm 52100 which has been laser cut and professionally heat treated starting from the top and moving down 1. small neck knife the whole knife is 143mm long by 23mm wide and the blade is just under 70mm long with a redwood burl handle and brass fittings with a loveless bolt and a leather sheath £30 including postage 2. small neck knife the whole k

Thanks guys it's just a small sharp knife for out in the field and can handle blood and water and just be wiped down so its very durable. Many thanks Alex

Hi everyone I have 1 of my handmade hunting knives for sale made from 4mm 52100 bearing steel that has been professionaly heat treated, it is around 140mm long and 23mm wide and has a scandi grind. The whole knife is 143mm long by 23mm wide and the blade is just under 70mm long The handle is made from tufnol and has a brass pin and lanyard tube and comes with some paracord. here it is : no sheath with this one im looking for £30 including postage for this one Many thanks Alex

sorry just deleted some messages so pm away guys. Alex

ok price drop on the last 3 to £40 each including a leather sheath and padded carry case and recorded postage which is a bargain, pm me if interested i may also take offers close to this price. Many thanks Alex

I still have the top 3 knives available, pm me if your interested. Many thanks Alex