Jump to content

barrywhite

Members
 View Profile  See their activity

  • Content Count

    1,223

  • Joined

  • Last visited

 Content Type 

Everything posted by barrywhite

  1. barrywhite
  2. barrywhite
  3. barrywhite
    if you own one you will soon learn how to take it to bits or sell it I did and I did
  4. barrywhite
    If you want cheap POWER the stealth has to be the daddy in the USA .Not in the uk they are expensive and with only 12 ftlbs allowed you need consistent shots and for the money spent on stealth they are rubbish . ......Does you valve move ...... if you are keeping the stealth you want to learn how to fix it your self, that has to be the only good thing about a stealth the ease you can take it a part.
  5. barrywhite
    so the pipe dia is very adjustable and it keeps the camera square .I also finish the pipe ends square.
  6. barrywhite
  7. barrywhite
    I have discovered an easy way to connect the camera to sight .If you get different lengths of plastic pipe and or straight pipe connectors this is to vary the dia of connection and eye relief for different sights . If you get a piece of pipe 4 inches long say and cut 3 slots along the the length 3 1/2 inches from one end evenly spaced .Then cut 3 slots from the other end 3 1/2 inches long evenly spaced .the pipe goes a bit like a paper chain. 6 cuts from each end are better but harder to do .Then to tighten the pipe or pipes together and to the sight I cut long strips of inner tube 24 inches
  8. barrywhite
    My have been roses sweets not sure collected rappers years ago .Also tried different lamps halogen led ect with different results .only quick experiments .
  9. barrywhite
    I just put a load of red blue and purple quality street sweet rappers over an old 6v push bike light .Not bad for nothing .Any one tried this or similar .I have bin planning to do this for years just got round to it.
  10. barrywhite
    the pellet choice you have listed are the same pellet in different tins or very very very close to each other airarms and jsb did not shoot to well from my gun.try superdomes bisley magnums both work good in my hw100 different trajectories .the one I use now are mosquito express got a few tins left you cannot get them any more ????? they shoot nice a little low on power but bang on at long ranges .
  11. barrywhite
    hold the lever when loading pellets.Incase trigger fails
  12. barrywhite
    the warm weather may have changed things a bit
  13. barrywhite
    If it is the one that goes in the middle of the valve assemble it is .014 90 shore .esey to replace screw out valve and the little brass bit all in one .also talonairgun.com will have all the imformation it has a list of all o rings .i have near 100 hundred o rings of that size in front of me.very cheap
  14. barrywhite
    may be he meens before the 12ftlb limit in the 60s or 50s or when ever .I have wondered this if you had an old 1850s air gun can you use it with out an fac.
  15. barrywhite
    yes and no
  16. barrywhite
    these lasers can be bought on evilbay but there is a little circuit between the laser and the battery .Does any one know electronics to show how.
  17. barrywhite
    Keep all your filling kit 100 percent dust and dirt free .
  18. barrywhite
    I fix parallex by cutting a round hole in card or paper 10mm 15mm 20mm dia what ever experiment .Tape the paper or card in front of the front lens of scope .hole in centre.You made need more ir light .This is not perfect but works a bit can sharpen up picture and loose parallex error.
  19. barrywhite
    ...............This is a problem I am having some scopes I have work better than others .At the moment I got an ok picture with a blury cross hair a blend of the two setting you discribe.I will try to get it better I have not messed with my object lense on the scope yet .The picture in the scope and the blury cross hair are still as good as a gen1 night scope or better with plenty of ir light.I focus my camera to about one and a half feet then I put it about two inches from the object lense .the scopes with thick crosshairs and low magnification seem the best so far.I also take a lot or the co
  20. barrywhite
    how do you mean 10in of the scope? If you zero your laser with your scope at say 25 yards .At 15 and 30 yards say the laser will not be at the zero point when looking through the scope .If the laser is under the barrel say, at 15 yards the laser will apear under the zero piont at 30 yards it will apear above the zero piont.The bigger the gap between the scope and the laser the bigger the difference between the scopes zero and the position of the laser when viewed at different ranges.
  21. barrywhite
    On a monocular I use .I can see the eyes reflect from ??????but when I can just see the rabbit clearly its about 40 yards .
  22. barrywhite
    I got one only because it is small and light easey to load for my mates kid .As an adult a small good quality spring gun would be much better .
  23. barrywhite
    I used a night vision monoclar mounted on my head with a laser sight on gun and walk about a bit .Rats are esey to stalk in dark.If you keep shooting them at the same spot they get a bit suss .
  24. barrywhite
    mistake....the light I got was 15 degrees not 120 degrees ..15 degrees is for m .
  25. barrywhite
    I have a yukon ir torch that mounts on night scopes this thing of ebay is a lot more light.I have just made a night sight with camera and monitor the light of this is excerlent 50m easy .the problem is the weight .the light would have to be mounted under the for grip .Or ?????? I was thinking of stripping the thig apart and throwing away the case had a little look but went for under the for end for the minuet.
×
×
  • Create New...