Jump to content

xraiderx

Members
 View Profile  See their activity

  • Content Count

    344

  • Joined

  • Last visited

 Content Type 

Everything posted by xraiderx

  1. xraiderx
    Nice shooting mr williams I have the same setup but in 22 Tx hc + mamba light + primos tri sticks Get more of a buzz from shooting the tx Over my J.Bd R10 + Ratworks ultra
  2. xraiderx
    I've got the gen 2 tripod Very sturdy and quiet Abit pricey at £100+ But a well built bit of kit
  3. xraiderx
    I use it But don't spray it on the gun Put it on a rag and then wipe the metal wear down Also used it on my R10 walnut stock 2 parts walnut oil 1 part balistol ( nice )
  4. xraiderx
    I fill mine to 250 bar the and that will give me about 85 shots ,but i have a longer cylinder and a reg What length is your pipe villamanMines 325mm
  5. xraiderx
    100+
  6. xraiderx
    Mines tenched And starts dropping off at 70bar from 230bar
  7. xraiderx
    Here's mine Tenched + Ratworks Hubb shroud 325mm cylinder Matts stock Love it.
  8. xraiderx
    You spent 1100 on your mate Wanna be my mate
  9. xraiderx
    Kinder egg toy thingies The flip up ones
  10. xraiderx
    Here you Lewis Will pm you info on cylinder
  11. xraiderx
    I had my Ultra SE tenched + Ratworks And was getting 65 good shots from 230 fill Now I have a 325mm cylinder on it Not done a full shot count yet But it over a ton
  12. xraiderx
    Yes please Pm coming
  13. xraiderx
    I have the bench rest Handy bit of kit And as for the spirit level I use the bubble out of an old bent level Gun in the rest bubble sat on the scope rail plum line at the bottom of the garden Tickerty boo
  14. xraiderx
    38.74 yards
  15. xraiderx
    Surf n turf Ummm
  16. xraiderx
    Not only was range bang on So was the shot Nice one ste ATB Garrick
  17. xraiderx
    This n that
  18. xraiderx
    Did have a raider10 when I first come on hereBut that's well gone now Cheers Garrick
  19. xraiderx
    Well I'm ever so sorry if I've upset you Just having the crack no what I mean Nawt wrong with a joke now n again It won't happen again Promise ATB Garrick
  20. xraiderx
    Heard ya the first time
  21. xraiderx
    Hello Lloyd Phil crampton (Ratworks ) Did mine not to long ago fitted a tench reg + tuned I then fitted a huub shroud which keeps the length down and its quiet Cost a few bob but worth it. Also XTX air or Mr bowkett recommend Cheers Garrick
  22. xraiderx
    Do it again with the lazzy mateNudge nudge wink wink say no more Pm me your results please Obviously you won't get the same as me coz my lazzy is fac rated But will post mine to your nearest rfd if you want Cheers Garrick
  23. xraiderx
    There is a post on BSAOG explaining this in more detail I did it to see the difference in hammer bounce (noise reduction in the action) And it dose But with more pressure on the hammer obviously the power will go up So then you have to adjust the internals which I'm not confident enough to do And after such a good job Phil Ratworks crampton has done It's staying as it is.
  24. xraiderx
    what pellets where you puting through itAA field 5.52
  25. xraiderx
    The elastic band was just to test the reduction in hammer bounce and power I was surprised by the increase of power. It also just as easy to make a permanent one
×
×
  • Create New...