Jump to content

RiffRaff

Members
 View Profile  See their activity

  • Content Count

    168

  • Joined

  • Last visited

 Content Type 

Everything posted by RiffRaff

  1. RiffRaff
    you dont say if its a C02 gun that you want to fill?? i bulk fill my Tau 7 pistol,my Crossman 1077 and my QB 78 from a CO2 fire extinguisher having said that its a lot of messing around for CO2 but i get extinguishers from work. but i would not try filling an extinguisher with HPA it would be madness
  2. RiffRaff
    http://www.thehuntinglife.com/forums/topic/141326-silencer-modifications/page__p__1431600__hl__%2Bair+%2Barms+%2Binternals__fromsearch__1#entry1431600 take a look here
  3. RiffRaff
    glad to see Brian Samsons work is still helping people. there are 2 more on the Anston club site, that will get you out to 50 an 55 yards. used them a while ago to sort hft an sft out. now i just dial in with the big niko stay safe
  4. RiffRaff
    http://www.airgunfor...down-guide.html you could have a look here you will have to log in to see the photos tho even tho it says logan axsor its just about the same rifle an a picture speaks more than words sorted a mates out with the stripdown he now has a none hissing rifle an it shoots spot on
  5. RiffRaff
    leo south street 1pm today have all the bits you need. would have PMed you but its all fekked up easy Niel
  6. RiffRaff
    hi peter when i got mine it came with a calibration number on a card that you could check on the combro website http://www.chronoscopes.com/ plus theres the manual an other stuff you should be able to sort yours out
  7. RiffRaff
    same sort of guide as buster linked on airarms owners but you might have to join to see it.using copper crinkle washers to replace the o-rings and instead of fiber washers. but to be honest i would do the full polish on sears then reset the trigger to the way i want it . i have done it to my s400 s410 an the s300 forgot to add if you gonna use copper washers an you cant source any drop me a PM
  8. RiffRaff
    hey guys is there any where to drop a 33 foot flat bed ticker trailer close to the site of the shoot for the weekend. got 2 caravans to drop off at Thames St, Lechlade, Gloucestershire GL7 3AG early sat . so thought i would bob tail over an put faces to names .if theres any where to park a renault magnum if its possible an seeing as the firm is paying for fuel.abit last min but what can you do money is money an i can sorta kill two birds with one stone an then pay the fees an stuff to shoot if thats ok with they guys that sorted this meet out atb ~ RiffRaff
  9. RiffRaff
    does your bolt look like one of these all you have to do is remove it from the action using a 3mm allen key. then warm it up an then turn to the way that you want it. you may have to get it pretty warm to loosen the loc-tite if you pull it apart you will have 2 bits like below only other thing is that you might have to strip the action to change a pin round but you might not hope this helps
  10. RiffRaff

    Cameron looked at Clegg chuckled and said, "You know, I could throw a £1,000 note out of the window right now and make somebody very happy." Clegg shrugged his shoulders and replied, "I could throw ten £100 ...notes out of the window and make ten people very happy" Hearing their exchange, the pilot of plane said to his co-pilot," Such big-shots back there. I could throw both of them out of the window and make 28 million people very happy

    1. x38

      x38

      lol .....

       

  11. RiffRaff
    why not just take the bolt handle off the back of the action an warm the handle up with a hot air gun to melt the loc-tight then turn it through 180 degrees job done Niel
  12. RiffRaff

    Just been to India on a golfing holiday when I was on the green all these Indians started shouting Tiger Woods Tiger Woods I thought cheeky piss taking b*****ds until I turned around and a tiger came out of the f*****g woods!

  13. RiffRaff

    i was down thegym today when i noticed a hole in my trainer, just big enought to put to fingers in ,so i did ...she made a formal complaint and now im banned for life

  14. RiffRaff
    deffo not cheap i have 2 of them both AR4s an both are 18 years old. one is sat in a CS1000 from custom stocks tother is in a sporting paid £450 an £670 for one in the cs1000 the best FT/HFT guns i own
  15. RiffRaff
    Excelent photos an indepth write up martin i will be trying your way next time. will even try boning the the legs, like its been said before less space in the freezer. and i sure the woofer would like the bones cheers Niel
  16. RiffRaff
    hey moley you could try this way of holding the combro on your gun use a fishing coaster,its a plastic band thats threaded bit like a hose clip if you get the drift, bit more solid than the good ole mk1 rubber band http://i46.photobucket.com/albums/f124/RiffRaff-KuH/combro2.jpg stay lucky shoot safe Niel
  17. RiffRaff
    hi BM pete you should have tried this from 19powell90 he explains it better than i did when i did mine over a year ago clicky here makes a hell of a differance to the standard AirArms one ATB Niel
  18. RiffRaff

    jeeze there making the street look so tacky thank god im off shooting

    1. "Earth!"

      "Earth!"

      Dont do it, London will be full of armed officer, close protection security and im sure our SAS will be laid up some where.

      its not worth the years you will have to serve behind bars, just take a few deep breathes and calm yourself!!

    2. Moll.

      Moll.

      lol lol

       

       

  19. RiffRaff
    nice bit of kit but i still like to do it the old fashioned way with a size Nine :)or my manual picks niel
  20. RiffRaff
    Roos Air Guns normaly about £15-20 quid depends on how much grief you give him :) but hes normaly fine shoot safe niel
  21. RiffRaff
    glad it helped matey Riff
  22. RiffRaff
    hi pete dont know about higher mounts for the nv500 bit if its fits on a dovetail, prob does you could try some of these http://www.scopesdirect.co.uk/products.asp?cat=493 might do the trick their is a few different ones hope this helps atvb Niel
  23. RiffRaff
    hi been using trebor extra strong mints for plinking targets for a while now, but also use bottle tops of numerous sizes hung from a string beteween 2 posts, beer bottle caps are good to, i get mine from the local ale house, that pasta thats like a tube is good too or the stuff thats round, big bag ferr next to nowt from asda tescos an the like did experiment with plaster of paris an moulds but never got the hang of it shoot safe Niel
  24. RiffRaff
    so i was right then RiffRaff
  25. RiffRaff
    i use jsb exacts in .177 8.4 grain but 4,52 head/skirt in both my S400 an my S410 both to good effect, very accurate if you do your bit, but depends on if your barrel like them some barrels are very pellet fussy. i have a webley stingray springer that hates them but will shoot crappy bsa elite at £2.50 at tin all day. horses for courses i suppose, there was a post about pellet swaps on here a while ago, might be worth having a look in there, or at a push order a sample pack from pellpak an see how it shoots with the different types you get from there atb RiffRaff edit for fat finger
×
×
  • Create New...