brett,mills

price and pics please

shouldnt use a bipod with a springer

Just another thought If you canter the rifle slightly this can have an effect on poi as well also i notice if i zero my scope on a flat terrain and then go to the range which has an upward and to the right incline it effects my poi so i have to rezero slightly. This is one of the joys of shooting a springer. once you have taken the action out of the stock and checked the breech screws( i think there is 1 on each side) could you not zero your scope from your hide. this site is pretty good for explaining canter of rifle against poi and other things too. air rifle demos

Hi Jack Im with phantom on this Ive had probs like this in the past on my springers one had a broken spring that had coiled on itself so i couldnt hear any rattling and the second was a big break in the spring which did have rattling after being shot. The scope you have is springer rated but could you try a mates to see if it improves any. Might be worth getting someone to chrono it for you just to check the consistancy And lastly have you checked the breech screws as these come loose over time so the barrel may not be seating correctly every time. Hope you sort it Brett

I have the xs19 in .22 flavour and its been stripped cleaned up, lubed, new ss spring and guides and a charliedatuna trigger Its running at 11.6 ft/lbs with very little recoil rammsbottom's do some good low priced scopes but a 3-9x40 would probably be all you need if you feel the need to rest the rifle you could fill a bag with sand as it will let the recoil still run good luck Brett

It would be interesting to see your results using bisley mags that will prob put you way over usually the heavier pellets up the ft/lb but also depends on the head size etc good result though

My son has a b2 and yes it was a bit crap out the box so a strip down was in order. I polished the piston,spring guide etc and fitted a new ss spring lubed it all with moly grease and its shooting 8 ft/lbs which is about right as they have a very short piston spring chamber. you can replace the trigger spring for a pen type and polish the trigger faces whilst its all it bits. I would put some lock thread on the breech screws,stock screws and trigger gaurd screws as they have a habbit of working loose. you can get good info from here on chinese airguns chineseairgunforum good luck Brett