Jump to content

jc43

Members
 View Profile  See their activity

  • Content Count

    13

  • Joined

  • Last visited

 Content Type 

Everything posted by jc43

  1. jc43
    Rookie Hunter This is what I use, if the ground is soft use a longer pin <p>I use these tunnels around the pheasant feed hoppers , I remove the rivet from one side of the bodygrip and replace it with a 6mm x 70 mm approx;threaded rod , the rod gets pushed into the ground and holds the trap in position, the trap; door at the top of the tunnel is large enough to remove the trap including any caught squirrel or rat, works for me.JC</p>
  2. jc43
    I had the same in one of my kennels, i put in a false floor raised on 2x2 batten to let the air circulate underneath , cured the problem , JC
  3. jc43
    A guy I know had a winch fitted to a new Hilux, dont know what it weighed it didn't look overly large, he removed it after wearing out two sets of front tyers in a very short time, all down to the extra weight on the front apparently.
  4. jc43
    I use a seperate side entry "extention" to my top entry Larsens they butt up against the main trap , gives me more trapping options, and are easy to move as not too bulky, JC
  5. jc43
    <p>I use these tunnels around the pheasant feed hoppers , I remove the rivet from one side of the bodygrip and replace it with a 6mm x 70 mm approx;threaded rod , the rod gets pushed into the ground and holds the trap in position, the trap; door at the top of the tunnel is large enough to remove the trap including any cought squirrel or rat, works for me.JC</p>
  6. jc43
    If my traps stop catching I move them 60- Yards and they can start catching again, works for me, JC.
  7. jc43
    Hi , I'm in the south east , Maize & Millet has been in about four weeks , its slow need some warm weather to get it going, slugs are giving the maize a bashing
  8. jc43
    hi dully1963 Sorry for the delay in answering,I read somewhere that the cream of tarter does not affect the brass as detergent or washing up liquid might , so i've only ever used COT , the cases are as clean inside as out , had do do a seperate post from the photo; , could'nt sus out how to get it all together ,JC
  9. jc43
  10. jc43
    I use a small ultrasonic from lidl's, take out the plastic liner fill with warm water a couple of teaspoons of cream of tartar powder, 10-12 decapped cases ,two or three , three min; cycles they come out shining inside and out ,rinse in warm water ,i put them on a rad ; to dry , never used a tumbler so cant comment.
  11. jc43
    type in whip finish tool on you tube
  12. jc43
    I have a Harris 9"- 13" on my .243 , wanted a bipod for the .270, went for one on the Bay, thought it worth a punt, it arrived within a week ,not a lot different to the Harris apart from the word Rambo on it , its 9"- 15", it may fall apart after a few outings but at thirty odd quid it seem OK Tactical 9"-15" Swivel or Adapter 20mm Rail Bipod RH9-2 Item number: 280365103529
  13. jc43
    Did the same thing myself ,I now have red tape round one bolt handle and yellow around the other,
×
×
  • Create New...