Jump to content

slyfox-mal

Members
 View Profile  See their activity

  • Content Count

    210

  • Joined

  • Last visited

 Content Type 

Everything posted by slyfox-mal

  1. slyfox-mal
    it could also be clipping the moderator try shooting a few pellets through it with the silencer off i use aa diabolo fields in 5.52 in my falcon and its spot on very accurate atb mal
  2. slyfox-mal
    looks like a Crusader from what i can see i think they where only available in fac so if you dont have a ticket be aware cheers mal
  3. slyfox-mal
    check here for loads of info on weights http://extorian.co.uk/shooting/pellets.html atb mal
  4. slyfox-mal
    they are the same pellet but i think barracudas are pre lubed atb mal
  5. slyfox-mal
    here here !!
  6. slyfox-mal
    aa field diabolo 5.52 all the way for me cannot fault them in my tx200hc and this is the pellet that air arms tests them with according to the documents you get with a new tx200 atb mal
  7. slyfox-mal
    i got a couple of tins of these for close range ratting and they are definatly a pcp or fac pellet at over 21 grains they are heavy my ytins are bisly magnums however underneath the tin they say barracuda same pellet but lubed these pellets work well in my falcon at no more than 25 meters so are ideal for close range ratting and have tremendous stopping power at these distancesand dont seem to over penetrate like my aa fields do at that range try them and see but id say its definatley not a sub 12 pound springer pellet atb mal
  8. slyfox-mal
    i bought a tx200 last year its a lovely rifle to shoot but it seemed a little low powered about 10.5 pound but i have put a few tins of pellets through it and now its shooting 11.4 pounds so they do improve with use i would definatly invest in a combro mk4 a nice bit of kit and gives you piece of mind however you have to mount it upside down on the tx as it wont fit right way up as its an underlever and for less the 40 quid its less than fout tins of aa diabolo fields atb mal
  9. slyfox-mal
    you will find the serial no just near where the barell meets the cocking lever on the underside mines a zb prefix so its a mk2
  10. slyfox-mal
    no problem dan enjoy it mate thats my good deed for the day lol atb mal
  11. slyfox-mal
    dan im sending you the spitfire manual to your hotmail account you have listed in profile now to check it over
  12. slyfox-mal
    BSA gun date letters Prefix Gun Calibre Date A CADET 0.177 1945/46 AA BUCCANEER 0.177 1979- B CADET 0.177 1946/49 BA CADET 0.177 1949/51 BC CADET 0.177 1951/59 C CADET MAJOR 0.177 1947/49 CA CADET MAJOR 0.177 1949/55 CC CADET MAJOR 0.177 1955/57 DA BUCCANEER 0.22 1979- E CLUB MK1 0.177 1948/50 EA CLUB MK1 0.177 1950/54 EB CLUB MK1 0.177 1955/57 EC CLUB MK1 0.177 1958 ED CLUB MK2 0.177 1959 EE AIRSPORTER+FEW CLUB MK2 0.177 1959/65 EF AIRSPORTER MK2 0.177 1965/67 EG AIRSPORTER MK2 0.177 1967/68 EK AIRSPORTER MK4 0.177 1969/71 EL AIRSPORTER MK5 0.177 1971/74 EN AIRSPORT
  13. slyfox-mal
    here you go http://falconowners.myfastforum.org/about2855.html hope this helps atb mal
  14. slyfox-mal
    you make them out of a 12 guage plaswad and an o ring and drill a 1/8th hole in it empty your air and remove the filler end on the cylinder and place the detwanger into the cylinder realigne the barrel and re connect the filler valve job done easy to do ill find the post that we did on my fn 19 later on and post it on here atb mal
  15. slyfox-mal
    they cost about 30 pence to make and you can fit one in about 20 mins http://falconowners.myfastforum.org/index.php all the info you will ever need about falcon and titan air rifles is on there
  16. slyfox-mal
    Do unto others as you would have them do unto you that my motto lads it costs nothing to be nice and who knows when i will need a favour its sort of like that film a few years ago pay it forward if more of us act like this on the airgun section we could have a really good crack on and get to really know some nice lads lol sermon over atb mal
  17. slyfox-mal
    no worries john nice to put a face to a name and any time youre passing pop in and have a brew i was only to glad to help a fellow hunter good luck tomorrow mate hope you bag up atb mal
  18. slyfox-mal
    no worries john the offer still stands mate if you get stuck that goes for anybody else in my area who needs a air rifle chrono checked im more than happy to do it for free all you have to do is contact me atb mal
  19. slyfox-mal
    i have a chrono and anyone near middlesbrough is more than welcome to meet me and ill test there rifle with it for free but you will have to come to me as i dont have transport atb mal
  20. slyfox-mal
    id be more than happy to chrono it for you mate but im in middlesbrough and dont have transport but i could show you how easy it is to use one if you fancy a trip to the boro atb mal
  21. slyfox-mal
    dont forget to mention hunting life as youre club and you get a discount with s.a.c.s for the first year 22 quid instead of 28 i got mind a couple of weeks ago atb mal
  22. slyfox-mal
    most people will tell you to steer clear of most chinese rifles ie smk xs19 there are ok for abit of plinking but they are very rough and ready in the most and in there untuned state ie just out the box they can be as rough as a badgers ar*e you are better off going to a gunshop and trying a few rifles out to find out what suits you but bare in mind cheap rifles are cheap for a reason you are better off saveing a little more and getting a class rifle that will last you a lifetime if looked after all the best mal
  23. slyfox-mal
    you are not breaking any laws as long as the rifle is not loaded and the mag is not loaded i do it all the time as its my only mode of transport you do tend to get some funny looks at times and expect to be pulled now and then but if your legal and youre rifle is legal and you are going to youre permission you sould be ok i have a padlock on my slip and a trigger lock on my rifle and i carry my insurance with me and touch wood no problems so far atb mal
  24. slyfox-mal
    the latest model hc comes with a plenum insert its a type of silencer sort of but mines pretty quiet anyhow and the barrel is screw cut if you want to go with a full silencer atb mal
  25. slyfox-mal
    gregg i sent you a pm atb mal
×
×
  • Create New...