slyfox-mal

it could also be clipping the moderator try shooting a few pellets through it with the silencer off i use aa diabolo fields in 5.52 in my falcon and its spot on very accurate atb mal

looks like a Crusader from what i can see i think they where only available in fac so if you dont have a ticket be aware cheers mal

check here for loads of info on weights http://extorian.co.uk/shooting/pellets.html atb mal

they are the same pellet but i think barracudas are pre lubed atb mal

here here !!

aa field diabolo 5.52 all the way for me cannot fault them in my tx200hc and this is the pellet that air arms tests them with according to the documents you get with a new tx200 atb mal

i got a couple of tins of these for close range ratting and they are definatly a pcp or fac pellet at over 21 grains they are heavy my ytins are bisly magnums however underneath the tin they say barracuda same pellet but lubed these pellets work well in my falcon at no more than 25 meters so are ideal for close range ratting and have tremendous stopping power at these distancesand dont seem to over penetrate like my aa fields do at that range try them and see but id say its definatley not a sub 12 pound springer pellet atb mal

i bought a tx200 last year its a lovely rifle to shoot but it seemed a little low powered about 10.5 pound but i have put a few tins of pellets through it and now its shooting 11.4 pounds so they do improve with use i would definatly invest in a combro mk4 a nice bit of kit and gives you piece of mind however you have to mount it upside down on the tx as it wont fit right way up as its an underlever and for less the 40 quid its less than fout tins of aa diabolo fields atb mal

you will find the serial no just near where the barell meets the cocking lever on the underside mines a zb prefix so its a mk2

no problem dan enjoy it mate thats my good deed for the day lol atb mal

dan im sending you the spitfire manual to your hotmail account you have listed in profile now to check it over

BSA gun date letters Prefix Gun Calibre Date A CADET 0.177 1945/46 AA BUCCANEER 0.177 1979- B CADET 0.177 1946/49 BA CADET 0.177 1949/51 BC CADET 0.177 1951/59 C CADET MAJOR 0.177 1947/49 CA CADET MAJOR 0.177 1949/55 CC CADET MAJOR 0.177 1955/57 DA BUCCANEER 0.22 1979- E CLUB MK1 0.177 1948/50 EA CLUB MK1 0.177 1950/54 EB CLUB MK1 0.177 1955/57 EC CLUB MK1 0.177 1958 ED CLUB MK2 0.177 1959 EE AIRSPORTER+FEW CLUB MK2 0.177 1959/65 EF AIRSPORTER MK2 0.177 1965/67 EG AIRSPORTER MK2 0.177 1967/68 EK AIRSPORTER MK4 0.177 1969/71 EL AIRSPORTER MK5 0.177 1971/74 EN AIRSPORT

here you go http://falconowners.myfastforum.org/about2855.html hope this helps atb mal

you make them out of a 12 guage plaswad and an o ring and drill a 1/8th hole in it empty your air and remove the filler end on the cylinder and place the detwanger into the cylinder realigne the barrel and re connect the filler valve job done easy to do ill find the post that we did on my fn 19 later on and post it on here atb mal

they cost about 30 pence to make and you can fit one in about 20 mins http://falconowners.myfastforum.org/index.php all the info you will ever need about falcon and titan air rifles is on there