Jump to content

maxwell

Members
 View Profile  See their activity

  • Content Count

    405

  • Joined

  • Last visited

 Content Type 

Everything posted by maxwell

  1. maxwell
    And not forgetting the angora
  2. maxwell

    're zero

    maxwell replied to ftm's topic in Airgun Hunting

    What pellets are you using in the rapid
  3. maxwell
    Yeh ill be able to put it back together ok , the problem ive got now is I ordered a new oring / seal set , they came in a packet all mixed up nothing saying which seal goes where one or two are obvious but might struggle trying to match some of the old distorted smaller ones.
  4. maxwell
    Finally got it out without damaging it , very gentle persuasion with light hammer and soft punch
  5. maxwell
    Ive seen the stripdown ive took all the screws out banged it about and still no luck, I dont want to be to heavy handed and make a mess of it, ill have another try of thinking a way of getting it to move, theres a video on you tube but its the multi shot and guess what it doesnt have a pellet tray
  6. maxwell
    Just going to say who the f---s this les neon
  7. maxwell
    Ive got my fn12 single shot stripped down as I am wanting to fit a detwanger/depinger and also give it a service, ive removed everything and am left with the air chamber with barrel and breech still attached have removed all of the grub screws and screws , now my problem is how do i removed the pellet tray to access the screw that holds the barrel/breach to the air chamber
  8. maxwell
    Does anyone ever make their own tools to use on metalworkers engineering lathe
  9. maxwell
    Does the hw99 only come in the standard version or can you get a carbine model like the hw95 and hw80
  10. maxwell
    What eukanuba were you getting 3 bags for £75, when i was feeding it , cost me an arm and a leg, would only buy it when it was on special. as there was better out there for less money
  11. maxwell
    BIG MAC , hes one of the best and will go out of his way to help anyone.
  12. maxwell
    Thanks lads
  13. maxwell
    Thanks lads just got to get some tools and materials sorted then its full steam ahead, any advice would be very much appreciated
  14. maxwell
    As ive just been getting myself a small lathe I am going to get myself a hw99 and have a go at tuning it , is there any dos and dont that people can advise me on which will help and make things a lot easier
  15. maxwell
    I hope you had your heart spray and your mobile charged up after your last lucky escape
  16. maxwell
    It looks as if its a soft wood, surely hardwood or semi hardwood would make a better job
  17. maxwell
    If your mate was with you hope he had his gloves, or you would of been gutting them all on your own
  18. maxwell
    Well give him a few names
  19. maxwell
    Get it in writing to cover yourself and ask him to get it signed by whoever has the authority to grant the permision
  20. maxwell
    Some of the garden fence paints you can get are rubbish and not even waterproof they wash off after time.
  21. maxwell
    thanks mac were both doing ok, the lads working down at billingham now, was killing him driving up and down to aberdeen every week end, he can spend more time with his two sons now ill tell him you are asking after him, is everything ok with you, ive got a mercury that needs tidying up and an old airsporter in bits that someone gave me the airsporter is pitted in rust and i dont know if all the bits are there , ill have to check and probably have a go at sorting it. Thanks for the reply ill let you if I get stuck was wondering what spring to put in the mercury as someone had stuck an ox sprin
  22. maxwell
    What are people using to paint the outside and insides of their hutches,to stop them from rotting
  23. maxwell
    J S RAMSBOTTOM has them on ebay £16.99 posted
  24. maxwell
    Im looking at stripping my mercury down and doing a full restoration, it is one of the earlier models that is coated in the black enamal type paint what product would people use to replace this or would they reblue/reblack all the metal work
  25. maxwell
    Mac what did you do to the internals on the airsporter to make it so smooth
×
×
  • Create New...