Jump to content

vader

Members
 View Profile  See their activity

  • Content Count

    71

  • Joined

  • Last visited

 Content Type 

Posts posted by vader

  6. CZ .17 Hmr Varmint.

    in Gun's and Rifle's

    Posted · Edited by vader

    Cz .17 HMR, 16' Barrell Screw cut, stunds fitted, one of the nicest stocks I've seen on a standard CZ. SAK Mod. 5 Shot mag.

     

     

    £200 Face to face only.

     

    Usual FAC Rules apply....

     

    Selling to help fund an Annie.

     

     

     

    07974 617071.

  7. Whats the best .17hmr???

    in Rimfire, Centrefire & Shotguns

    Posted

    seems to me like its a copper problem then and you need to put some time in getting it sorted....

     

    Also a good carbon remover too ...

     

    Snap.

     

     

    I'll leave it soaking in KG1 from, 8 til 1, then KG12 from 1.30 until 5 and test again.

     

    don't forget to give it a good scrubbing too.... at the end of the soak.

     

    ;)

     

    Thanks snap shot, soak in kg1, then scrub with the bronze brush, is it ok to go up and down the barrell or just up? Then scrub with bronze brush after kg12 or just patch?

  9. Whats the best .17hmr???

    in Rimfire, Centrefire & Shotguns

    Posted

    the last resort is to check all the fittings fixtures are tight.

     

    next is a good copper cleaning routine, as even though the .17 is a rimfire it still is pushing a fair velocity, hence leaving traces of copper in the barrel....

     

    hope you get sorted...

     

     

    Snap.

     

     

    Even checked the mounts before the last try, ran a bronze brush down the barrell then left it filled with kg12 for a while and patched through. I did this before and it solved the prob for about 50 rounds. If I need to full clean then put 50 rounds through it to get it on song its just unacceptable, even though i've put 50 through it since the last clean and the groups are still 1 1/2 inch. no good for me what so ever. Bloomin thing.

  10. Whats the best .17hmr???

    in Rimfire, Centrefire & Shotguns

    Posted · Edited by vader

    This is what i had to do to get mine shooting....

     

    try and see if the barrel is free floating.... by sliding a piece of paper up between the barrel and stock to it touches the action.

     

    On most of the CZ American's there is a little sticky point on the right hand side, take the stock of the gun... sand where the barrel touches the stock, and then apply a coat of varnish and let dry....

     

    they shoot best when mildly dirty.... and take a while to settle after cleaning...

     

    if you don't have it done already, change the trigger too.... for all of about 12 pounds from rimfire magic......

     

    best of luck.

     

     

    Snap.

     

     

    Yep, done both. I shot a group under half inch on paper after mounting my zeiss, went out that night and hit everything shot at in the head. All of a sudden I start missing again, check on paper and groups are around 1 1/2 -2 inch. Boresnaked, still crap, Cleaned with rod and brush, still crap, 50 later still crap.

  11. Whats the best .17hmr???

    in Rimfire, Centrefire & Shotguns

    Posted · Edited by vader

    As above please fellas, thinking of getting rid of my cz ans 223 and getting a blinding hmr to sit my 20x50 conquest on.

     

     

    What do you intend to shoot with it and over what distances...is that 2 guns you are getting rid of or one..and is that a fixed mag 20x scope you are referring to?

     

    The HMR is no substitute for a .223!

     

    The HMR is VERY accurate in the right conditions, even my Silhouette HMR will deliver touching shots at 100 yards if I do my bit, so I struggle to understand why anyone would want to spend a fortune on one, it isn't noted as a target tool, so how are we defining BEST HMR?

     

    We all have different circumstances to deal with and preferences, so it usually comes down to personal choice. :thumbs:

     

     

    Just getting fed up with wasting ammo down the barrell of my cz. 1 minute the groups at 100 yard are touching, the next there almost 2 inch groups, try'd it clean and dirty. Seems very inconsistent. I sell my rabbits so all need to be head shots. When you come back from a night of missing as many as you shoot you feel like binning it.

  24. .223 WSSM

    in Rimfire, Centrefire & Shotguns

    Posted

    Depending on the scope you want, if its that S & B for £350.

     

    Then £350 isn't going to get you a new rifle, but a good second hand one, and there should be something in .223 that you fancy.

     

    Perhaps a S/H Remmy, Plenty of CZ's about too.

     

    SS :thumbs:

     

     

    Its finding the bugger!

     

     

    Guntrader.co.uk

     

    Good place to start...guns for sale section!! :thumbs:

     

     

    Cheers guys.

    looking now.

     

    Im a lefty. not many lh .223's on there. do you think they refere to lh if the bolt is on the left? I dont mind the bolt on the right but the stock must be ambi or l/h.

  25. .223 WSSM

    in Rimfire, Centrefire & Shotguns

    Posted

    Depending on the scope you want, if its that S & B for £350.

     

    Then £350 isn't going to get you a new rifle, but a good second hand one, and there should be something in .223 that you fancy.

     

    Perhaps a S/H Remmy, Plenty of CZ's about too.

     

    SS :thumbs:

     

     

    Its finding the bugger!

×
×
  • Create New...