russian sniper

Beretta provisionally sold on another site Thanks for all the interest! ATB Daz

Er no sorry mate, will haggle a bit but not that much! ATB Daz

I have now decided to sell my Beretta 687 silver pigeon 's' o/u shotgun. 12G 30" barrels, 3" chambers with spotless bores and spotless chambers, multi choke with 8 beretta mobil chokes and beretta choke key. Single selective trigger . Marked "sporting" on the barrels. Well timed strong ejectors and good primer strikes from the firing pins. Action is tight with no movement off the breech face whatsoever. (its the 1 i got the fox with in my avatar pic !!) Not sure of age as i bought it s/hand from cluny clays (£850) around 18 months ago. In good condition with a couple of small scratches on

Steiner Binoculars 8x30, cased with captive covers and instruction manual. Very good condition, only selling as have some Zeiss ones on the way! Link: http://www.sailgb.com/p/8x30_binoculars_steiner_safari/ Very clear and bright. Made in Germany. Ideal for shooters!! £120 posted RMSD ATB Daz

CRKT M16-13SF Special forces edition folding knife. As new condition, very sharp, never been used!! LINK: http://www.crkt.com/m16spfrc.html Can be opened quickly using 1 hand, liner lock with further locking system. That makes the folding knife into a fixed blade knife with full hilt! More info with pics just follow the link! Boxed with instructions, bolt tool and spare pocket clip. Very very good condition! £55 posted RMSD ATB Daz **over 18's only**

Have had a lot of interest from people to buy it. But am just looking for a swap at the moment mate. ATB Daz

May consider a swap for a Theoben SLR OR Fenman ATB Daz

Hi after seeing a few Theoben Scirroco's up for sale and have always wanted 1 as it was the first ever air rifle i was allowed to use by my cousin! I am looking to swap: HW97K Mk1 .22 Venom Ultraglide tuned with fitted Venom slim silencer/underlever catch. Blacked compression tube done at the same time as the tuning. Very consistant (5fps between shots) and very accurate using H&N FTT(2 1/2 tins included) Fitted with a Tasco High Country 6-24x40 AO Scope with fitted butler creeks- 1 piece mount. (scope the same era as the MK1 HW97K) **not shown in the pics** Few marks o

It is a very good deal! A great saving on buying it all new! It really is bright, even with the filters fitted. Had quite a few foxes with this setup. ATB Daz

Lightforce 140 scope mounted gunlamp with amber and red clip on filters, 12v 18ah battery and deben charger £100 COLLECTED "NO POST" AS THE BATTERY IS QUITE HEAVY!! The scope mount will fit 1" and 30mm scope tubes using a rubber adaptor (supplied) Collected from Helensburgh on the west coast of scotland. Will not split up as i have no need of a battery without a lamp ATB Daz Pic of lamp with red filter

Simmons 8 point 4-12x40 AO scope with duplex reticle. Matte black 1" tube with fully coated optics, waterproof, shockproof, fogproof. Boxed and in very good condition with fitted butler creek flip up covers. (noticed a couple of marks on the turret caps) £55 posted royal mail special delivery ATB Daz

SOLD!!! Hi am selling my Nikon Prostaff 3-9x40 scope. 1" tube ,very clear optics, Bullet drop compensator reticle, boxed in very good condition. Comes with fitted butler creek flip up scope caps. £85 plus post ATB Daz

Thanks for the tips guys! I bought some 150grain sierra gameking sbt bullets today. Have loaded 30 of em in batches of 5 with different loads of varget, all with an oal of 2.750" as per the sierra i-5 ballistic suite i have on my laptop. Can't wait to try em out!!! ATB Daz

Hi i will be reloading .308 soon using varget and cci large rifle primers (same components as i use for reloading my 22-250) in Lapua brass. As i will be using the .308 for roe,sika and red deer which bullets and which weights should i give a go?? (thinking of 150-180 grain) I know its a min of 100grain for all deer with the exception of roe. The rifle is a Winchester Mod70 Featherweight 1-12" twist I'm looking for recommendations from experienced deer stalkers. Thanks Daz

Thanks for the info Jamie it is already screw cut 1/2 UNF and will be coming with a new Wildcat P8 fitted and rings and bases for my WTC 3.5-10x50. Baz is sorting out some pics for me soon. Just hope it doesn't take ages for the variation to come back!!! ATB Daz