Gav 1,708 Posted June 18, 2008 Report Share Posted June 18, 2008 I dont know if this has ever been mentioned before, but any way here goes :- You know the little white bags of silica gel (do not eat throw away) you get in some electrical goods, kids toys etc, well, I all ways keep a couple in my rifle sleeve, reason being they attract moisture like s**t and keep things dry. You know the story your out in the field and even if its not raining cold steel attracts moisture, you get home and clean etc, but you will never remove all the moisture. So to keep your rifle in tip top and avoid moisture just place a couple of these little silica gell bags in your rifle sleeve, if your using your rifle day in day out replace them every month or so. There you go short and sweet and maybe I have done a bit for recycling too Quote Link to post
ferretville 69 Posted June 18, 2008 Report Share Posted June 18, 2008 Never thought of that gav top idea Quote Link to post
Gav 1,708 Posted June 18, 2008 Author Report Share Posted June 18, 2008 I was just thinking (i do this occasionaly), a lot of you will be saying "I keep my rifle well oiled, that drives off the moisture", but unless you are pyhsicaly dipping the thing in oil (not a good tip), you will still get moisture where you can't see or get to, just thirty years of experiance thats all, and an after thought! Quote Link to post
celticwar 1 Posted June 19, 2008 Report Share Posted June 19, 2008 i do that gav . i keep silica gel from work then just slide it in with me gun , i clean my gun after every shoot , never thought to post the idea well done its great topic , idea using the gel you should never have any problems with rust if leaving your gun for long time in its bag Quote Link to post
SEAN3513 7 Posted June 19, 2008 Report Share Posted June 19, 2008 oh!!!!!!...............is that what it is????? little packets of white powder...............come on....... easy mistake to make!!!!!! nice one gav..................top tip!! regards sean Quote Link to post
duck 0 Posted June 19, 2008 Report Share Posted June 19, 2008 nice one gav i'll have to try that sounds like a great idea how many would you be able to put in your bag?? Quote Link to post
victor 10 Posted June 19, 2008 Report Share Posted June 19, 2008 good tip, will use it whyen i get my guns Quote Link to post
Sigmund Fraud 0 Posted June 19, 2008 Report Share Posted June 19, 2008 You can get specialist air rifle versions. I'm not sure if it's just silica rebranded, but I believe Napier does some. They last about 9 months, just pop one in with your rifle. Quote Link to post
Coney 3 Posted June 19, 2008 Report Share Posted June 19, 2008 I was just thinking (i do this occasionaly), a lot of you will be saying "I keep my rifle well oiled, that drives off the moisture", but unless you are pyhsicaly dipping the thing in oil (not a good tip), you will still get moisture where you can't see or get to, just thirty years of experiance thats all, and an after thought! Quote Link to post
Guest buster321c Posted June 19, 2008 Report Share Posted June 19, 2008 We use a similar stuff at work ` dessicant` its used in the spacer bar between the glass in a double galzed unit and dries out all the moisture . Sometimes the glass gets misted up if the units broken down , this would happen without dessicant , so i may well get me a little bag of it seeing as we buy it in bulk Quote Link to post
Deker 3,478 Posted June 19, 2008 Report Share Posted June 19, 2008 Additional points....the gel can be placed in an oven to dry it out, this will extend it's useable life. Be careful not to overdo the silica gel if your rifle has a wooden stock, it can dry the wood too much as well and split the stock!!!!!! Quote Link to post
Gav 1,708 Posted June 19, 2008 Author Report Share Posted June 19, 2008 Additional points....the gel can be placed in an oven to dry it out, this will extend it's useable life. Be careful not to overdo the silica gel if your rifle has a wooden stock, it can dry the wood too much as well and split the stock!!!!!! Good points there, I had never thought of it drying the stock out, I have had two small bags in my sleeve (one at each end) for two years now and have just been and checked the stock out and not a crack in sight .. phew, the stock on mine is hardwood and I would presume they would dry the wood out well before the manufacturing process. Thanks for the input, its always good when people add things you never thought of yourself Quote Link to post
gilly-93 31 Posted June 19, 2008 Report Share Posted June 19, 2008 dont get what were talking about here! Quote Link to post
Gav 1,708 Posted June 19, 2008 Author Report Share Posted June 19, 2008 dont get what were talking about here! These little bags that you find in electrical goods, kids toys etc. Quote Link to post
gilly-93 31 Posted June 19, 2008 Report Share Posted June 19, 2008 dont get what were talking about here! These little bags that you find in electiral goods, kids toys etc. ohh yeh you get them in shoe box's aswell but how do you use it? Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.